CPOTE 2022 has concluded· conference archive Portal version 2026.11.09.01

Register

CPOTE 2022

Detailed programme

29 sessions and 149 presentations over 3 days.

Wednesday, 21 September

08:40 – 09:40

Opening ceremony & keynote lecture

Room-A No.4.05 (4th floor)
  1. 08:40 - 09:00 Opening ceremony
  2. 09:00 - 09:40 Smart Renewable Energy Systems and decarbonisation

10:00 – 11:20

Parallel session 1

Room-A No.4.05 (4th floor)
  1. 10:00 - 10:20 Experience of photo-catalytic and temperature-assisted air and flue gas purification from NOx using a pilot-scale photo-reactor CPOTE-1027-A
  2. 10:20 - 10:40 Effect of catalyst support in Ni-based catalysts on reaction characteristics of humidified methane-ammonia mixed gas CPOTE-1124-A online
  3. 10:40 - 11:00 CFD modeling of the multiphase flow with condensation in the two-phase ejector condenser CPOTE-1117-A
  4. 11:00 - 11:20 Oxy-combustion of torrefied biomass with large steam concentrations CPOTE-1071-A online

10:00 – 11:20

Parallel session 1

Room-B No.4.01 (4th floor)
  1. 10:00 - 10:20 Periodic gas temperature measurement as an inverse heat transfer problem, utilization of the Particle Filter algorithm and mechanistic models CPOTE-1077-A
  2. 10:20 - 10:40 Application of the CFD modelling to design of an experimental stand for investigation heat transfer in liquid metals CPOTE-1100-A online
  3. 10:40 - 11:00 Methods of flow maldistribution quantification - dispelling conclusions ambiguities CPOTE-1120-A
  4. 11:00 - 11:20 Heat transfer in a dense fluidized bed for immersed horizontal tube bundle CPOTE-1164-A

11:40 – 13:00

Parallel session 2

Room-A No.4.05 (4th floor)
  1. 11:40 - 12:00 Thermochemical processing of waste materials towards production of new value-added products according to circular economy concept CPOTE-1048-A
  2. 12:00 - 12:20 Conversion of waste from wind turbine blades into sustainable chemicals to support the concept of circular economy CPOTE-1157-A
  3. 12:20 - 12:40 Solvolysis as a chemical recycling method for end-of-life waste composites - an experimental analysis CPOTE-1140-A online
  4. 12:40 - 13:00 Methods of increasing the efficiency of the methanol producing plant and its yield in waste-to-fuel technology CPOTE-1030-A

11:40 – 13:00

Parallel session 2

Room-B No.4.01 (4th floor)
  1. 11:40 - 12:00 Thermo-ecological comparison of hydrogen production technologies for the Polish power grid CPOTE-1158-A
  2. 12:00 - 12:20 Energy and exergy analysis of energy storage processes by pump hydro storage and hydrogen CPOTE-1004-A online
  3. 12:20 - 12:40 Evaluation of avoidable exergy destruction for a heat pump employing CO2/propane-based mixtures and recovering waste heat from data centre for district heating CPOTE-1041-A online
  4. 12:40 - 13:00 Thermoecological cost of hydrothermal carbonization of the under-sieve fraction of residual municipal wastes CPOTE-1136-A

11:40 – 13:00

Parallel session 2

Room-C No.4.02 (4th floor)
  1. 11:40 - 12:00 Assessment, optimisation and working fluid comparison of organic Rankine cycle combined with negative CO2 gas power plant system CPOTE-1052-A
  2. 12:00 - 12:20 Estimate analysis of plutonium impact on nuclear fuel cycles considering single and multiple reprocessing of the spent nuclear fuel CPOTE-1103-A online
  3. 12:20 - 12:40 Integration of electrolysis with pyrolysis: effects of carbon conversion in methanol production CPOTE-1131-A
  4. 12:40 - 13:00 Reconfiguration of a small, inefficient district heating systems by means of biomass Organic Rankine Cycle cogeneration plants – Polish and German perspective after 2035 CPOTE-1168-A

14:00 – 14:40

Keynote lecture

Room-A No.4.05 (4th floor)
  1. 14:00 - 14:40 The role of thermodynamics in innovative energy solutions online

15:00 – 16:40

Parallel session 3

Room-A No.4.05 (4th floor)
  1. 15:00 - 15:20 Modelling of entrained flow steam gasification of sewage sludge CPOTE-1043-A online
  2. 15:20 - 15:40 Hydrogen generation from sewage sludge - an energy-based market check-up CPOTE-1169-A online
  3. 15:40 - 16:00 Distillation of post-processing water derived from the hydrothermal carbonization process of sewage sludge CPOTE-1023-A
  4. 16:00 - 16:20 Hydrothermal carbonization of sewage sludge: estimation of energy balance CPOTE-1026-A
  5. 16:20 - 16:40 Integrated production of urea and nitric acid in the pulp industry: techno-economic and environmental analysis of black liquor gasification-based processes CPOTE-1139-A

15:00 – 16:40

Parallel session 3

Room-B No.4.01 (4th floor)
  1. 15:00 - 15:20 Comparative analysis of CO2 capture technologies using amine absorption and chemical calcium looping methods integrated with natural gas combined cycle power plant CPOTE-1162-A
  2. 15:20 - 15:40 Analysis of CO2 capture process from flue-gases in combined cycle gas turbine power plant using post-combustion capture technology CPOTE-1121-A
  3. 15:40 - 16:00 Numerical analysis of CO2-water separation in a horizontal double T-junction CPOTE-1070-A
  4. 16:00 - 16:20 Numerical model of supercritical CO2 power cycle tailored with a Molten Carbonate Fuel Cell for waste heat utilization CPOTE-1147-A
  5. 16:20 - 16:40 Temperature distribution in the pre-concept research HTGR – ANSYS Fluent and MELCOR analyses CPOTE-1045-A online

15:00 – 17:00

Parallel session 3

Room-C No.4.02 (4th floor)
  1. 15:00 - 15:20 Development a novel collision model for granular flows based on application of machine learning algorithms CPOTE-1156-A
  2. 15:20 - 15:40 Mathematical model of the two-phase supersonic flow via dry-ice blasting nozzle CPOTE-1151-A
  3. 15:40 - 16:00 Rotor shape optimisation of novel Savonius type wind turbine with reduced order models and evolutionary algorithms CPOTE-1135-A online
  4. 16:00 - 16:20 Structural optimization of H-Rotor wind turbine blade combined based on one-way Fluid Structure Interaction approach CPOTE-1129-A online
  5. 16:20 - 16:40 3D optimisation of shape of the H-Rotor blades by means of CFD and ROM approach CPOTE-1130-A online
  6. 16:40 - 17:00 Circular economy and hypothesis of full recycling. A 2nd lаw based estimation of limitations and obstacles CPOTE-1019-A

Thursday, 22 September

09:00 – 09:40

Keynote lecture

Room-A No.4.05 (4th floor)
  1. 09:00 - 09:40 Power-to-X. Exergy-based evaluation

09:40 – 10:40

Pre-recorded video session & coffee

Room-A No.4.05 (4th floor)
  1. 09:40 - 09:50 An analysis on entropy balances in multiple-layer structure consisting of a human body and a residential thermal environment under onset of heat stroke CPOTE-1101-A online
  2. 09:50 - 10:00 Exergy analysis of the human body and its environment to evaluate air conditioning systems CPOTE-1017-A online
  3. 10:00 - 10:10 Sustainable coverage of a residential building's energy and water demands CPOTE-1087-A online
  4. 10:10 - 10:20 Implementation of comfortable thermal conditions in nursery school by increasing building energy efficiency CPOTE-1114-A online
  5. 10:20 - 10:30 Applying dynamic energy and exergy analysis to a building envelope CPOTE-1115-A online
  6. 10:30 - 10:40 A field measurement on the multi-family house realizing both radiant cooling and natural ventilation in Tokyo CPOTE-1102-A online

09:40 – 10:40

Pre-recorded video session & coffee

Room-B No.4.01 (4th floor)
  1. 09:40 - 09:50 Car fleet electrification and its energy policies oriented by regionalities CPOTE-1015-A online
  2. 09:50 - 10:00 Oat straw pyrolysis with ammonium chloride doping. A view on surface chars, kinetics and thermodynamics CPOTE-1021-A online
  3. 10:00 - 10:10 Pyrolysis of hydrochars obtained from blackcurrant pomace in single and binary solvent systems CPOTE-1076-A online
  4. 10:10 - 10:20 Single and double degradations in steam turbine identified by genetic algorithms CPOTE-1089-A online
  5. 10:20 - 10:30 Coupling small modular reactors with existing combined heat and power plants operating in high-efficiency cogeneration CPOTE-1112-A online
  6. 10:30 - 10:40 Simulations of station black out accident for a VVER 1000 nuclear reactor power unit CPOTE-1104-A online

09:40 – 10:40

Pre-recorded video session & coffee

Room-C No.4.02 (4th floor)
  1. 09:40 - 09:50 Low-temperature CO2 capture technologies, applications and potential CPOTE-1032-A online
  2. 09:50 - 10:00 Economic analysis of a liquid hydrogen regasification cogeneration system CPOTE-1022-A online
  3. 10:00 - 10:10 Thermodynamic analysis of post-combustion carbon dioxide capture process in a pilot plant equipped with a heat integrated stripper CPOTE-1081-A online
  4. 10:10 - 10:20 Thermodynamic analysis of the blast furnace process under the conditions of top gas recirculation and high oxygen enrichment of the blast CPOTE-1137-A online
  5. 10:20 - 10:30 Model-based optimization of alkaline electrolysis systems for hydrogen production CPOTE-1028-A online
  6. 10:30 - 10:40 Optimization of renewable energy-based seawater desalination systems CPOTE-1029-A online

09:40 – 11:00

Invitation to view presentations in PDF format & coffee

Conference website
  1. Thermodynamic analysis of the Allam cycle co-fired by biomass and natural gas CPOTE-1018-A online
  2. The effect of trends in outdoor temperature changes on the efficiency of using high thermal inertia to prevent building overheating CPOTE-1038-A online
  3. Experimental study of the behavior of PCM and heavy building envelope structures during summer CPOTE-1040-A online
  4. Thermodynamic analysis of an actual cycle of an ethylene reliquefaction plant by entropy-cycle method CPOTE-1057-A online
  5. Conventional and advanced exergy analysis for an organic Rankine cycle CPOTE-1064-A online
  6. Off-design simulation of the gas turbine and water heat recovery boiler operation using thermodynamic model and correction factors CPOTE-1098-A online
  7. Technical-economic analysis of a heliothermic plant to supply electricity for a stand-by thermoelectric power plant CPOTE-1159-A online
  8. Surrogate model for thermal storage tank heat losses estimation applied to concentrating solar power plants CPOTE-1161-A online
  9. Retrofit of a combined heat and power plant by CO2 capture during the combustion of syngas from sewage sludge gasification versus zero-emission combustion of hydrogen produced using renewables CPOTE-1090-A online

09:40 – 11:00

Poster session & coffee

Lobby - groundfloor
  1. Improved moisture removal using HTC treatment of the digestate from wet fraction of MSW CPOTE-1047-A
  2. Conceptual design of experimental test rig for research on thermo-flow processes during direct contact condensation in the two-phase Spray-Ejector Condenser CPOTE-1126-A
  3. Thermodynamic analysis of integration of a negative emission power plant cycle with oxygen generation station CPOTE-1088-A
  4. Phy2Climate - Sustainability aspects of phytoremediation combined with drop-in biofuels production CPOTE-1165-A
  5. Assessment of rotational speed impact on the performance of hydrodynamic disintegrator dedicated for the sugar beet pulp hydrodynamic disintegration CPOTE-1152-A
  6. Technical, environmental and economic aspects of adapting the underground water infrastructure facility for museum purposes with energy supply from the own wind turbine CPOTE-1063-A

11:00 – 13:00

Parallel session 4

Room-A No.4.05 (4th floor)
  1. 11:00 - 11:20 Numerical studies of fast pyrolysis with partial oxidation of lignocellulosic biomasses in a drop tube furnace CPOTE-1031-A
  2. 11:20 - 11:40 Application of coal and biomass fly ashes as catalysts in pyrolysis of agriculture biomass CPOTE-1034-A
  3. 11:40 - 12:00 Hydrothermal carbonization as part of the biorefinery of cheese whey CPOTE-1083-A
  4. 12:00 - 12:20 Thermochemical co-liquefaction of fruit pomace’s blends in a binary solvent system towards value-added bioproducts CPOTE-1066-A online
  5. 12:20 - 12:40 Comparative investigation of the sintering behavior of different biomass ashes CPOTE-1037-A online
  6. 12:40 - 13:00 A review on biomass-derived hard carbon materials for sodium-ion batteries CPOTE-1148-A

11:00 – 13:00

Parallel session 4

Room-B No.4.01 (4th floor)
  1. 11:00 - 11:20 Simulation based techno-economic analysis of solar cooling system for university building CPOTE-1062-A
  2. 11:20 - 11:40 Comparison of traditional district heating and low temperature district heating systems featuring organic Rankine cycle and heat pump CPOTE-1051-A
  3. 11:40 - 12:00 Performance of heat exchanger connections in heat distribution networks CPOTE-1053-A
  4. 12:00 - 12:20 Alignment of the heat recovery potential with the local area heat demand for selected industrial entities in the city of Gliwice CPOTE-1163-A online
  5. 12:20 - 12:40 Stock and development scenarios of building heating technologies for the thermal energy demand of residential buildings in Bavaria till 2050 CPOTE-1001-A
  6. 12:40 - 13:00 A systematic framework for the multi-time integration of industrial complexes and urban systems CPOTE-1108-A

11:00 – 13:00

Parallel session 4

Room-C No.4.02 (4th floor)
  1. 11:00 - 11:20 Potential of using Pyromark as an absorber coating in low-temperature solar installation sections - A case study for heat industrial application and parabolic trough collectors CPOTE-1116-A
  2. 11:20 - 11:40 Conditions for use of long-wave infrared camera to measure the temperature of the sky CPOTE-1123-A online
  3. 11:40 - 12:00 Technological solutions that improve concentrated Solar-Dish technology in Mediterranean area CPOTE-1106-A online
  4. 12:00 - 12:20 An analysis of the potential for hydrogen production by PEM electrolysis powered by renewable electricity sources in Poland CPOTE-1170-A online
  5. 12:20 - 12:40 Emergy analysis of energy transition from coal to renewable at chicken farm CPOTE-1160-A
  6. 12:40 - 13:00 Influence of HTC on thermal drying of sewage sludge digestate CPOTE-1039-A

15:00 – 17:20

Parallel session 5: Special session on ENERGIZERS project (CO2-Enhanced Geothermal Systems for Climate Neutral Energy Supply)

Room-B No.4.01 (4th floor)
  1. 15:00 - 15:20 An overview of EnerGizerS project
  2. 15:20 - 15:40 Identification of key parameters for the effective use of the EGS-CO2 systems and selection of appropriate locations (WP1)
  3. 15:40 - 16:00 Characteristics of the geothermal reservoir based on the results of comprehensive laboratory tests of rocks (WP2)
  4. 16:00 - 16:20 Experimental determination of properties and behaviour of CO2-EGS working fluids (WP3)
  5. 16:20 - 16:40 Mathematical modelling of geological reservoir for CO2-EGS exploitation (WP4)
  6. 16:40 - 17:00 Mathematical modeling of CO2-based topside systems for heat and power production (WP5)
  7. 17:00 - 17:10 Techno-economic and environmental assessment (WP6)
  8. 17:10 - 17:20 Summary and future actions of EnerGizerS project

15:00 – 17:20

Parallel session 5: Special session on ACTIVATE project (Ammonia as a fuel for internal combustion engine)

Room-C No.4.02 (4th floor)
  1. 15:00 - 15:10 ACTIVATE Project under Norway Grants scheme
  2. 15:10 - 15:40 Challenges, solutions & progress within Work Packages by David EMBERSON, Grzegorz PRZYBYLA, Marcin JEWIARZ, Michal PASTERNAK, Karolina PETELA
  3. 15:40 - 16:00 Direct injection of ammonia and biodiesel in a single cylinder compression ignition engine CPOTE-1111-A
  4. 16:00 - 16:20 Combustion characteristics, emissions, and engine performance of ammonia-diesel dual fuel CI engine CPOTE-1079-A
  5. 16:20 - 16:40 Simulations of ammonia spray evaporation, cooling and mixture formation in a direct injection compression ignition engine CPOTE-1107-A
  6. 16:40 - 17:00 Life cycle assessment of selected ammonia production technologies from the perspective of ammonia as a fuel for heavy-duty vehicle CPOTE-1153-A
  7. 17:00 - 17:20 Panel discussion and Concluding remarks

Friday, 23 September

09:00 – 11:20

Parallel session 6

Room-A No.4.05 (4th floor)
  1. 09:00 - 09:20 Experimental investigation of porous anode degradation of a molten carbonate fuel cell fed with direct fermentation product composed of bioethanol CPOTE-1010-A
  2. 09:20 - 09:40 Numerical analysis of natural gas and hydrogen fueled solid oxide fuel cell based micro cogeneration units with anodic gas recirculation CPOTE-1110-A
  3. 09:40 - 10:00 Numerical analysis of the relation between porosity of the support and functional layer and performance of solid oxide fuel cells using computational fluid dynamics CPOTE-1097-A
  4. 10:00 - 10:20 A discussion on mathematical models of steam reforming process for the needs of fuel cells CPOTE-1055-A
  5. 10:20 - 10:40 Modeling the material microstructure influence on electrochemical performance of Molten Carbonate Fuel Cell CPOTE-1144-A
  6. 10:40 - 11:00 Design improvement and flow distribution variation study in a 10 kW Molten Carbonate Fuel Cell stack aided by CFD modeling CPOTE-1145-A
  7. 11:00 - 11:20 Applying a deep learning algorithm for molten borate fuel cell modeling and optimization of electrolyte composition CPOTE-1146-A

09:00 – 11:20

Parallel session 6

Room-B No.4.01 (4th floor)
  1. 09:00 - 09:20 Energy analysis of the Power to SNG system based on solid oxide electrolyzer CPOTE-1096-A
  2. 09:20 - 09:40 New concept of energetic use of pyrolytic gas from waste in sustainable technologies of metallurgical industry CPOTE-1134-A online
  3. 09:40 - 10:00 Fuel cell control strategy to minimize hydrogen consumption in a trolleybus powered by range extender CPOTE-1105-A online
  4. 10:00 - 10:20 Potential improvement of reversible chillers based on estimation of avoidable exergy destruction CPOTE-1046-A online
  5. 10:20 - 10:40 Power and gas: a novel heat/cold recovery solution applied to the Świnoujście LNG regasification terminal CPOTE-1058-A online
  6. 10:40 - 11:00 A critical parametrisation study of the membrane technology integration in an advanced coal-fired power plant CPOTE-1072-A
  7. 11:00 - 11:20 Possibility of using a photovoltaic system to secure the production of vegetable sprouts CPOTE-1173-A

09:00 – 11:20

Parallel session 6: Special session on NCO2PP project (Negative CO2 emission gas power plant) and RECOWATIG project (Sustainable technology for the staged recovery of agricultural water from high moisture fermentation products)

Room-C No.4.02 (4th floor)
  1. 09:00 - 09:15 Negative CO2 emission gas power plant (acronym: nCO2PP) – main idea and critical challenges in the project
  2. 09:15 - 09:30 Integrated assessment of negative emission power plant using sludge as fuel – contrary to reference case
  3. 09:30 - 09:45 Thermal valorisation of sewage sludge (HTC) and conversion to syngas – optimal integration with power plant
  4. 09:45 - 10:00 Efficient wet combustion of syngas and critical process component (CO2 capture and utilization)
  5. 10:00 - 10:15 Development of a Spray-Ejector Condenser for the use in a negative CO2 emission gas power plant CPOTE-1125-A
  6. 10:15 - 10:30 Prototype research installation for oxy-combustion – wet combustion chamber + turbines
  7. 10:30 - 10:40 Sustainable technology for the staged recovery of agricultural water from high moisture fermentation products (acronym: RECOWATDIG) – project’s goal and problems to solve
  8. 10:40 - 10:50 Biogas from organic waste on industrial scale
  9. 10:50 - 11:00 Wastewater from digestate to clean water
  10. 11:00 - 11:10 Technical installation for conversion from digestate to water and char - mass energy balance
  11. 11:10 - 11:20 HTC: Opportunities for water, nutrient and energy recovery from Organic fraction of Municipal Solid Waste

11:40 – 13:40

Parallel session 7

Room-B No.4.01 (4th floor)
  1. 11:40 - 12:00 The combustion of torrefied biomass in a commercial-scale domestic boilers CPOTE-1033-A
  2. 12:00 - 12:20 Experimental tests of the integration of thermoelectric generators in a biomass boiler CPOTE-1084-A online
  3. 12:20 - 12:40 Theoretical and experimental investigations of hydrogen direct injection and combustion process in a constant volume chamber CPOTE-1068-A online
  4. 12:40 - 13:00 Novel wet combustion chamber concept CFD studies with triple water inlet CPOTE-1142-A online
  5. 13:00 - 13:20 Densification of chemical energy in HTC effluent using cascade membrane separation CPOTE-1044-A
  6. 13:20 - 13:40 Assessment of a potential of internal heat recuperation from industrial crops of sprouts CPOTE-1172-A

11:40 – 13:40

Parallel session 7: Special session on CCUS.pl project (Carbon Dioxide Capture, Utilization and Storage)

Room-C No.4.02 (4th floor)
  1. 11:40 - 11:50 An overview of CCUS.pl project
  2. 11:50 - 12:30 Proces modelling, simulations and assessment of CCUS clusters
  3. 12:30 - 13:10 National-level fuel and energy model, and macroeconomic model including CCUS technologies in an integrated approach
  4. 13:10 - 13:20 CCUS industrial projects in Poland
  5. 13:20 - 13:30 CCS4CEE project developemnt and future perspectives
  6. 13:30 - 13:40 CCUS.pl cluster and summary

13:40 – 14:10

Presentation of awards & closing ceremony

Room-A No.4.05 (4th floor)
  1. 13:40 - 14:00 Walther Nernst Scientific awards for achievements in the field of electrochemistry
  2. 14:00 - 14:10 Closing ceremony

CPOTE 2022 has concluded

Registration is no longer available

The conference took place on 20–23 September 2022 (Warsaw, Poland). This website is kept as a public archive, so the conference system with registration, log-in and submissions is closed.

Questions about this edition? Write to cpote@s-conferences.eu.

Display settings

Theme
Contrast · WCAG level

WCAG level A sets no colour-contrast requirement, so “A” is the standard design. AA guarantees at least 4.5:1 for all text, AAA at least 7:1 and turns off moving backgrounds. Your choice is remembered on this device only.

↑↓ navigateEnter openCPOTE 2022 archive